Recycled Style 2

Number 2 in my ongoing attempt to get people inspired by using recycled clothes, whether you wear them "as is" or play around with modifying them, as I do. The garment industry is one of the top five sources of pollution in the world, so buying used clothing is just one little way you can help the environment. 

For this project I used one man's XXL T-shirt and one size large woman's shirt bought from the Goodwill. For the binding around the neck and armholes I cut strips from an old tank top of mine. Then I went through my stash of Goodwill kimonos to see if I had anything that would match. Bingo. Then I topped it off with a necklace I made years ago. All-in-all, it makes for a pretty nice outfit. 

Here are the details.

Simplicity pattern 1463 (view D modified by me), stencil, Tulip Soft Cover fabric paint in Dusty Rose, pink bugle beads and purple seed beads, J & P Coats embroidery thread in a dusky rose (it was an old skein I'd had for years, with no color numbers on the sleeve) 

Beads are sewn on with a back stitch using regular sewing thread doubled. These beads all had holes large enough that I could use a regular sewing needle instead of a beading needle. This made me VERY happy, as beading needles are a pain in the rear to thread. Well...for me, anyway.

The binding was hand sewn on with embroidery thread using a fly stitch. I cut strips 1 1/4" wide with a rotary cutter, then fold the strips in half the long way and iron them. This gives me the equivalent of bias tape, and I use the strips in exactly the same way.

 One of the places I modify the pattern is to round off the neckline instead of leaving it a V. This makes it easier to sew the binding on.

Normally I avoid buying shirts with pockets, as it cuts down the amount of fabric I can use, but I liked the color of this shirt, and it was an XXL, so I had plenty to work with. 

The back is also where I do a bit of altering from the pattern. When laying out the pieces, I add width to the center back (About two-three inches). I can get more gathers that way, which makes the lower part of the shirt hang a little nicer. 

Next I added the Liz Claiborne kimono I had found last summer in the pajama section at the Goodwill. It is a great example of the kinds of things you can find that don't need any customizing or sewing...just a good wash.  

The necklace was made from vintage navettes (the diamond shaped dangles) I bought years ago on Ebay, pieces of a vintage chain necklace that had belonged to my husband's grandmother, but was broken, and some beads from my stash. The center "jewel" is an old chandelier crystal.

A few notes. 

The yoke on this shirt was made from a woman's large top and was not pure cotton. It was also thinner material than I like. However, despite those two drawbacks, I really liked the colors and the pattern, so I went ahead and bought it. The cotton binding around the neckline and armholes help stabilize it, but in all honesty, it would probably have been better if I had reversed the colors and used the patterned piece on the bottom and the heavier cotton T-shirt material for the yoke. I just didn't have enough of the patterned piece to do that. 

I hope these posts about recycling clothing inspires you do give it a try, with the understanding that not everyone wants to bother with beading and stenciling, or may not know how to sew. But trust me, there are tons of garments out there that need nothing more that a really good cleaning (I run my finds through the wash twice). As an example, the patterned shirt I used for the yoke could have been worn "as is" with the kimono and it would have looked fantastic...all for less than $10. And remember, check out the pajama section at any used clothing store or the Goodwill. I have found some really nice kimono-type coverups there for around $4.99 or less. 

Recycled Style

In an effort to promote recycling, periodically I am going to post photos of how I put together clothes picked up mainly at the Goodwill, but also at secondhand clothing shops, and antique/junk shops. I hope this will inspire others to try doing the same, since the garment industry is one of the top ten polluters in the world. There are literally millions of garments and accessories out there waiting to be reused. Most take nothing more than a good wash, or minimal mending. Following the photos are some tips on what to look for and what to avoid, and some of the mistakes I have made.

If you are creative, like me, the possibilities are endless. Here is an example. 

The shirt was made from two mens XXXL T-shirts, using Simplicity pattern #1463 that I slightly modified. The neck and armhole bindings are strips of T-shirt sewn on with embroidery thread using a fly stitch. The front of the shirt was stenciled and beaded (beaded backstitch) before the shirt was sewn up. I added the beads to the neckline months later. 

The necklace is one I made from a broken vintage bracelet found for about $5 at an antique mall. 

Months later I was trolling through the pajama and nightgown section of our local Goodwill and found this kimono. It was a perfect match and all I had to do was wash it.

This is just one example of how I put things together. Recycling is fun, even if all you do is wash the garment and wear it. I have found lovely linen jackets, silk shirts, denim jackets, and I even found a beautiful, butter-soft black leather jacket for only $24.00. 

Here are some tips, and some of the mistakes I've made. Keep in mind, some trips to the Goodwill or secondhand shops I have come out with nothing. Other times I score big time...like the leather jacket.  

Read the labels, if they are still attached. It will tell you the fabric content, size, and the washing instructions. Some garments have had the labels cut out, which I find frustrating.  I stick with natural fabrics, mostly cotton and linen. 

On size. I wear shirts medium to large, depending on the style (I have wide shoulders). Be careful! Some places, including our local Goodwill store, do not separate junior sizes from adult sizes. I tend to eyeball a shirt by holding it up to me and seeing if the shoulder seams are in the right place. This has tricked me a few times. When I get the shirt home and try it on, the underarms are way too tight, and the shirt fits too snug. Junior medium. Lesson learned.  

Look for holes in the fabric. Some can be really tiny. Look for stains and pass these garments by, unless you can cut them up and use the fabric on something else (I do this every now and then), as most of the time the stains will not come out. 

Try to get a feel for natural fabrics, which will help when the labels are missing from the garment. Just this week I came home with what I thought was a thin cotton, but no label. Washed it and the top shrunk up to doll clothes size. With this particular top, I won't even use it for appliqués, as I have no idea how much further it will shrink. The top already had a couple of tiny holes along the bottom front, and the sales lady just gave me the shirt since she couldn't sell it once she realized it had holes in it, so at least I wasn't out any money on that one. Too bad, 'cause the shirt was really pretty. 

This may sound gross, but sniff the shirt, especially the underarms. Some odors never wash out. If you smell anything, pass it by. 

If you know how to sew, you can use mens XXXL T-shirts as flat fabric (which is what I did with the shirt in the photos). Cut the sleeves off, but save them if you do appliqués. Cut along ONE side seam and both shoulder seams. After you do that, you can lay the fabric out flat and lay on your patterns. Here is a photo taken out in my garage where my big work table is. As you can see, you end up with a pretty good hunk of fabric. I try to buy shirts with no front pockets, no logos or designs, and all pure cotton. 

So there you have it, for this time. Recycling is fun, a good way to save a lot of money on clothes, and a wonderful way to stem the tide of pollution. For creative types, there is even more fun with stitching, beading, stenciling, appliqués, reverse appliqués, embroidery, and customizing patterns. For more examples of stenciled, beaded, and appliquéd shirts, see my previous post. 

Enjoy! You can save a ton of money and still be styling it!

Mandala Stenciled, Beaded, Stitched T-shirt II

This is the second mandala shirt I have done, and I really like the way they have both turned out. Here is a pictorial essay on the process, and at the end some tips to keep in mind if you would like to try this process on your own. 

All these projects are done on Goodwill T-shirts, and the stenciled appliqués are other Goodwill shirts cut up for fabric.

Picking the colors. You can see I have already stenciled the first layer.  Paint color here is Dioxazine Purple acrylic by Americana. Try to chose harmonious color combinations, as the beading adds a lot of eye-candy to the fabric and you want that to be the focus. 

Next, set up the layers on the garment T-shirt. I use large safety pins for this. Be sure to center the design, which can be a bit tricky on shirts that have been worn as many times as these. The knit has usually warped or twisted to a certain degree. Get it as close as you can. I tend to eyeball it, step back, and eyeball it again until I think it is good to go. 

Then the fun begins. The beading. I used regular sewing thread, and whatever needle will fit the beads I am using. Test the beads after the needle is threaded, as some will go over the needle, but not over the extra bulk of the thread. Keep in mind the intricacy of the design, and don't get beads that are too large or too small. I use a standard, easy-peasy back stitch for beading. Once the beading is done, I do a running stitch just to the outside of the stencil. In this case, at each point of the mandala I added a blue bead. Stitching this way keeps the material from rolling back over the beads.

In this photo you can see how the knit is rolling toward the front. I got this one on backwards so had to deal with it. Also, as in this case, it looked like the knit was going to roll the other way, and then the more I worked with it, the more it changed. Bottom line, don't sweat over it. 

Next is to unpin and trim away the top (in this case rose colored) fabric, leaving about a 1/4" margin. Be careful not to cut into your running stitches, or the fabric underneath. 

 Re-pin the bottom layer and do another running stitch around the edge, again 1/4" margin. When finished, unpin the fabric and trim away the excess, 1/4" away from the running stitches. Again, being VERY careful not to cut into the running stitches or the shirt. 

Lastly, in this design, I add a charm in the center. This can be anything from a larger bead, a button, or charm. 

At this point, you are done! And just remember, this is meant to look handmade, not like some mass-produced piece from China. Small imperfections are not the end of the world. 

Here are a few tips and suggestions for stenciling and beading on fabric.

I use shirts from the Goodwill in an effort to recycle rather than buy new. The garment industry is one of the most heavily polluting in the world. Not only do I buy the base T-shirt, but also I buy XXXL mans shirts to cut up for flat fabric. The purple on this shirt was just the sleeve from one of those large shirts. I double wash everything before using. 

Stencils can be found everywhere. There are literally hundreds to choose from. To start, pick something simple. Also, I like to leave sections of the stencil un-beaded as part of the whole design. 

Beads are sold everywhere or can be ordered online. JoAnn's and Craft Warehouse are good sources. Online, Fire Mountain Gems and Beads will overwhelm you with choices. The size of the bead should be in relation to how complicated the stencil design is. Also, if your beads are really small, you will need to use a beading needle. I use a size 13. Anything smaller makes me crazy trying to thread it. 

When setting out the layers, check to see which way the knit tends to roll, then face that toward the main shirt. With this kind of work, it isn't super important whether you use the right or wrong side of the fabric, so if the knit curls toward the right side, put that side face down. This keeps the knit, after you have washed it a few times, from rolling over the stitching. 

As for paint, I have used fabric paint, craft paint, and my regular acrylic paints...all acrylic based, so easy to clean up and fast drying. I dab them on with small makeup sponges available at any cosmetic counter. I leave the piece to dry overnight and that has worked out just fine. 
Note: I tried a thick glitter paint once. Once. It was a nightmare to get in the stencil and didn't cover very well. When the project was finished, I threw the paint away! I have used metallic paint with great success, though. Next I want to experiment with fabric spray paint!

Here are a few photos of previous projects I have done. I love beading and stitching over stencils. I was my way of solving the problem of how to get an intricate pattern design on fabric that wouldn't rub off before the beading was done. I get things laid out,  cue up Pandora, and zone out. 

 The above piece is also reverse appliqué.

Enjoy...it is as fun as it is addicting. 

If you have any questions, please feel free to comment. 

Firing The Old Girl Back Up...With Photos of Projects Past and Present.

Recently I got asked by a Facebook artist friend why I had let this blog site sit silent for so long. I told her it was because I didn't think anyone was really interested, and that most exchanges of info and photos was happening on FB rather than on blog sites. She agreed, but lamented the loss of the way blog sites used to be. I know there was one blog, Notes From the Voodoo Cafe, done by Rice Freeman-Zachary, that I loved to read, and listen to her pod casts, but eventually she dropped it all and went to FB. It made me sad.

So, I thought about it, and decided that I would fire this old girl back up, and do it just for me as a type of diary. I will post a notice on FB when I add something here, and those who are interested can ck it out, and those who aren't can ignore it. I may only post things once a month or so, but if it keeps me connected with a few other people out there, then that is all for the good.

This first post will be photos of projects that have been completed, and projects that are in the works. It would take too long to describe each one in detail, but at least it gives an overview of what I have been doing for the last few months, and what is coming.

Hope you enjoy.

Wedding circlet - commission

Stenciled T-Shirt

Beaded back stitch over stencil

Eco-print experiment

Near completion, The Message

The Message competed

Preliminary drawing for Embrace the Night 

There you have it. A run down of the things I have finished, and the latest painting in progress. There is also a cropped jacket sewing project going on as well, but I don't have photos of that yet. 

If you are so inclined, please leave a comment. It's nice to know there are actually people out there reading this. Thanks!

Two Recycle Projects

With the weather becoming more and more iffy, inside projects are nice, for the most part relaxing, and give me a few new items of clothing to wear. Here are the latest ones to keep me occupied when I'm in-between painting and cleaning horse stalls, and it's pouring rain outside.

The first is a turquoise T-shirt. It's a bit shorter than I like them, but it was only $2.99 at the Goodwill, so I bought it because I loved the color. I decided to stencil a design on the front then add either tulle or more T-shirt material to the bottom and sleeves. I have seen tulle added to shirts, and as long as it doesn't look too cutesy, I like it. So, black stencil design to be beaded, and then black tulle added to the hem.

The photos make the shirt look royal blue, but it isn't. The stencil is a Martha Stewart.

The little white mark at the center is made with soap, to help me line up the design.

I think I will add a small piece of T-shirt material on the inside of the shirt, behind the stencil design, to help carry the weight of the beads and stitching.

The next in line is a very wide sweatshirt, also purchased at the Goodwill. I want to make a jacket out of it, with elbow length sleeves.  I am always shoving the sleeves of sweaters, T-shirts and sweatshirts up my arm, so figured why not just cut this one off at that length. The lines on the front are made with soap to show the center, and then how much I am going to trim away from the front. This thing is REALLY wide (the size tag says M, but two medium sized people could fit inside it), so I will also have to figure out a way to take in the back. Maybe make something out of the leftover sleeve material— like the little mini belts on the back of jackets (I am sure they have a proper name, but I don't know what it is).

The T-shirts above it were laid out to see what trim color would work the best. I finally decided on the dark blue. The buttons and beads will go on last. Originally I had pulled out some very nautical looking brass buttons with anchors embossed on them, but decided it looked way too yacht club, preppy, proper, ladies-who-lunch, so I put those back in the button box and went with these mother of pearl ones, turned back side forward, with some old red buttons I dug out to be sewn on top.  This project may or may not work out. I have mixed feelings about it, so when I get it sewn up, if I don't really like it, I won't bother to add any decorations.

Here are both projects laid out on my big work table in the garage.

Those should keep me busy for a while. I am especially looking forward to stitching and beading the T-shirt. So, time to grab a book on CD, make a cup of tea, park myself in a comfy chair, and bead away.